Spindle bearings are single-row angular contact bearings, with 15° and 25° contact angles, but many specials are available when the application demands. Important characteristics of spindle bearings include contact angle, materials, precision, preload and bearing arrangement and more.
Mar 05, 2014· This video describes the installation of a grinding wheel on a surface grinder. Since the replacement was required because of a big crunch! We will also be looking at how to verify that the machine has not been damaged to the point of requiring a spindle replacement.
Okuma spindles cover the entire range of spindle duties, from heavy duty milling to holding micron tolerances in a grinding application. Our over thirty years of spindle rebuilding enables Northland Tool to rebuild this wide range of spindles with the precision needed to complete the job right.
Our mobile spindle service company performs spindle taper grinding to restore, repair and service your machine tool spindle condition. With a small internal grinding spindle, mounted on a slide and rotary table, we grind your spindle taper in your machine to restore the original angle.
The strut pinch flange may need slight grinding on one side to clear the weld. 4. Torque the spindle nut between 189-254 ft/lbs. 5. Torque the strut pinch flange between 141-199 ft/lbs. 6. Re-align front suspension after installation of Racecraft 2” Drop Spindles. Caliper Installation Information The Racecraft Inc. 2” drop spindle is designed to use